Skip to contentSkip to conversation

flexible_rxd/check_IPv4_IPv6_TCP_fields_in_RXD_on_specific_queues: port config rxq/txq failed after attach port

DPDK/testpmd Bug 1663 [email protected] 1 participant 1 message Feb 18, 2025

lore
Share & tools
lore

[email protected]

author Acked-by Chengwen Feng
#0 lore raw

https://bugs.dpdk.org/show_bug.cgi?id=1663

            Bug ID: 1663
           Summary: [dpdk-25.03]
                    flexible_rxd/check_IPv4_IPv6_TCP_fields_in_RXD_on_spec
                    ific_queues: port config rxq/txq failed after attach
                    port
           Product: DPDK
           Version: 25.03
          Hardware: x86
                OS: Linux
            Status: UNCONFIRMED
          Severity: normal
          Priority: Normal
         Component: testpmd
          Assignee: [email protected]
          Reporter: [email protected]

Target Milestone: ---

Environment
===========
DPDK version: e5176f23ae8b31437c3e5eb875c81f95bf3a9942 version: 25.03-rc1
OS: Ubuntu24.04.1 LTS (Noble Numbat)/6.8.0-41-generic
Compiler: gcc version 13.2.0
Hardware platform: Intel(R) Xeon(R) Platinum 8380 CPU @ 2.30GHz NIC hardware: Intel Corporation Ethernet Controller E810-C for SFP [8086:1593] (rev 01)
NIC firmware:
driver: ice-1.16.3
FW: 4.70 0x8001f7e2 1.3755.0

Test Setup
Steps to reproduce
==================
1. bind ports to dpdk
./usertools/dpdk-devbind.py -b vfio-pci 0000:af:00.0
2. launch testpmd
x86_64-native-linuxapp-gcc/app/dpdk-testpmd -l 1-3 -n 4 -a 0000:af:00.0 -- -i
3. detach and attach ports
port stop all
port detach 0
port attach 0000:af:00.0
port stop all
4. config port rxq/txq
port config all rxq 16
port config all txq 16

Results:
========
The status of the port is down, but it cannot be configured. testpmd> port config all rxq 16
Please stop all ports first
testpmd> port config all txq 16
Please stop all ports first

Expected Result:
================
Can successfully configure rxq/txq after attaching the port. testpmd> port config all rxq 16
testpmd> port config all txq 16

bad commit:
===========
commit 994635edb2c038e64617bcf2790a8cd326c3e8e0

Author: Huisong Li <[email protected]>
Date:   Mon Jan 20 14:42:18 2025 +0800

app/testpmd: add port attach/detach for multiple process

The port information needs to be updated due to attaching and detaching port. Currently, it is done in the same thread as removing or probing device, which doesn't satisfy the operation of attaching and detaching device in multiple process.

If this operation is performed in one process, the other process can receive 'new' or 'destroy' event. So we can move updating port information to event callback to support attaching and detaching port in primary and secondary process.

Note: the reason for adding an alarm callback in 'destroy' event is that the ethdev state is changed from 'ATTACHED' to 'UNUSED' only after the event callback finished. But the remove_invalid_ports() function removes invalid port only if ethdev state is 'UNUSED'. If we don't add alarm callback, this detached port information can not be removed.

 app/test-pmd/testpmd.c | 68 +++++++++++++++++++++++++++++++++++++-------------
 1 file changed, 51 insertions, 17 deletions
Signature · 2 lines
You are receiving this mail because:
You are the assignee for the bug.